본문 바로가기

카테고리 없음

Hayward Slide Valves Manual High School



1515 Wynkoop, DENVER, CO. Cooling towers, variable speed drives, condenser water pumps, control valves, exhaust and supply fans, generator exhaust piping, smoke detectors, fire dampers, smoke management systems, and all piping and connections. Manual High School; Rocky Mountain High School; University of Colorado - ACS-12 Replacement. Thermostatic Mixing Valves. Due to the bimetallic strip's high sensitivity and nearly non-existent inertia. Regulation via a cylindrical “slide valve.

  1. Manual Slide Valve
  2. Hayward Slide Valve

Top

Product Description

Hayward push pull valve (2') Hayward# SP0410X502S

School

This valve is used on the Hayward Micro clear and Pro Grid series de filters
This valve includes filter connections
valve color is black
round cover, attaches to body with sp-722d nut
no model# on cover, 'sp-410-a' on the body
... dimensions
height is 13-1/2' (excluding bottom ell & handle)
centerline spacing on pipes is:
.between port a & b is 5', between c & d is 5'
.inside distance between each set is 2-1/4'
... used on
de2400, de3600, de4800, de6000, de360s, de480s,
de600s, de720s
... will replace
????????
... valve positions (clockwise from top)
open (backwash), lock (filter)
... port arrangement (clockwise from top)
starting above lock position
port b, port a above this (these are short 2' slip
. pipes - inside diameter about 2-3/8'
on the opposite side of the valve body
port d, port c above this (these attach to filter
. with threaded bulkhead nuts marked s-200-r
. inside thread diameter of nuts about 3-1/8'
on the bottom of the valve
port e - 2' slip, a 2' slip x spigot 90 degree
. elbow glues into this (used for backwash line)
... includes
plumbing connectors for filter
2' slip x spigot 90 degree elbow (sp-410-f)
handle height adds 4-1/2' to this

Manual Slide Valve

Vari-Flo Control Valve Functions

  • Filter - For normal filtering and regular vacuuming
  • Backwash - For cleaning filter sand bed of accumulated debris
  • Rinse - Use after completing backwash cycle to ensure all dirty water is rinsed out of the filter to waste
  • Waste - By-passes the filter for draining or lowering pool water level and for vacuuming heavy debris directly to waste line.
  • Recirculate - Water is recirculated through the valve by-passing the filter
  • Closed - Shuts off the flow from the pump to the filter
  • Winter - For winterizing (SP0714T only)
  • 1 year warranty

* The following valves are used with the Hayward Micro-Clear and Pro-Grid DE filters.

Hayward Slide Valve

Slide

Performance Data and Valve Positions:

TCS: An Entrepreneurial Air-Express Company in Pakistan The case study introduces Khalid Awan, the co-founder of TCS, which is an entrepreneurial air-express company in Pakistan. Awan has successfully built a sizeable company despite serious hurdles. TCS: An Entrepreneurial Air-Express Company in Pakistan. The tragic events of September 11 will most likely put pressure on the firm's revenues and create considerable uncertainty. Awan is also starting to think about diversification of his personal wealth, which is concentrated almost entirely in TCS. Decisions on all these issues will impact the firm's future financing policies and growth. Tcs an entrepreneurial air-express company in pakistan pdf online.

Product Specifications

2 in.
Hayward Pro Grid & Micro Clear DE Filters
Push Pull
Side Mount
I don't know the exact one, but it's very similar to this: Hayward SP0410X502S Slide Backwash Valves for DE Filters on Sale at YourPoolHQ
So, the pin broke that holds the handle to the bottom half of the valve. This has happened before as I'm using cotter pins due to the fact that I've never been able to get the actual pin back in it. I bought a new one, but maybe it was the wrong size. Cotter pins are cheap and easy to replace. I was always able to pull the bottom half out with a large pair of needle nose pliers, but this time it won't come out. I'm pretty sure I'll break it it I keep pulling on it (possibly already have). I'm ok with replacing the valve stem at this point, but I just need to get it out oft here and I don't know what else to do other than take a large screwdriver and try breaking it apart, but my concern there is damaging bottom part or getting pieces down inside the value itself.
Any ideas on how to remove it?
If I can't get it out and have to replace the whole valve, how hard is that to do?